Broken Paintbrush

Part 1: The Metals

Here is the fist step of every Iron Warrior: the silver/iron armor and gold trim. After priming the model black I them paint an even layer of Mithril Silver overall the metal areas. Shinning Gold and Iyanden Darksun are used to paint the trim. The model is then washed Black then Devlan Mud.

Part 2: The Leather

The leather areas are based with Vermin Brown then Snakebite Leather and highlighted with Bleached Bone. The areas are then washed with Ogryn Fleash

Part 3: The Bone

The bone areas are done next.  Khemri Brown is used as the base coat which is then highlighted with Bleached Bone then Skull White. Gryphonne Sepia is then washed over the bone to age it and redefine the grooves.

Part 4: The Daemon Blade

Orkshade Green is used as the base for the Daemon Weapon (count it as a relic blade, power sword, frost blade, or what ever). This is then highlighted with Goblin Green then Scorpion Green and finally Skull White. Thraka Green wash is then used to tie it all together.

Part 5: The Daemon Face

The Daemon Face is often adorned on the Chaos armor, in this case on the shield of one of my Chosen. The face is base coated Mechrite Red then highlighted with Blood Red, then Blazing Orange and finally Golden Yellow. The Tongue was based with Liche Purple and highlighted with Shadow Grey. The full face and tongue was then washed with Leviathan Purple

Part 6: The Base

Now the final touches are done on the model. I’ll go back and do any touch-ups at this point including any “lining in” with Chaos Black.

The base is first painted Graveyard Earth and then highlighted with Bleached Bone. Flock is then glued on in random clumps. Finally the rim is painted black.

The final step is to spray with matte varnish to protect the paint job.

Step 1: Graveyard Earth

The usually takes at least two coats. The first I’ll mix a bit of Foundation paint in and water it down to almost a wash. I also add a bit of white glue. This first mix gets between the gaps in the bigger rocks and helps them all stick together a bit more. I will then go back over the base with pure Graveyard Earth once the first layer is done. This gives a nice brown base to work from.

Step 2: Bleached Bone

Bleached Bone is then used to highlight the base. I sometimes do a intermediate layer of Graveyard Earth and Bleached bone before moving to pure Bleached bone.

Step 3: Glue

I then take an old paint brush and “paint” on glue where I want the flock to go. This should be a here-and-there application and I often look for places on the base where some of the rocks have come off or blobs of paint make it look bad, these will get covered up with grass.

Step 4: Pile of Flock

I take a huge pile of my flock medium and dump it on the base and allow it do dry for a bit. I’ve created this mix out of the Burnt Grass from GW, used tea, and ballast from a model railroad shop.

Step 5: Flocked

After letting the glue dry for a short bit I’ll knock the extra flock off into the container and gently blow on the base to help the grass stand up.

Step 6: Chaos Black

Finally I paint the rim of the base Chaos Black.

Step 1: Mechrite Red

Mechrite Red is used as the base. The color is very similar to Scab Red but covers easier (finding a trend here for the base coat?). I only avoid the deepest pockets with this color.

Step 2: Blood Red

Blood Red is painted on next. For the reds I don’t spend time on blending, the colors lend themselves well to layering. This is laying down the main color so I only avoid the lower levels to stay as Mechrite, everything else gets bloody. On some spots I did do a second layer of Blood Red to make sure it was smooth and bright.

Step 3: Blazing Orange

To highlight red you don’t add white, it just makes it pink. Instead move to orange then yellow. So for this step I move to Blazing Orange to highlight. This layer brings out the ridges and protrusions.

Step 4: Golden Yellow

Yellow acts much like a white on other colors for the highlight. I use Golden Yellow as the spot highlighting for the red, pulling out the sharpest points and topmost ridges.

Step 5: Liche Purple

Moving on to the tongue I use Liche Purple as the base. This gives a good contrast to the red and gives the face a other-world look.

Step 6: Shadow Grey

I don’t go straight to Shadow Grey but rather use 1:2 LP to SG to create the highlight. For the tongue I only go with the one set of highlights, but when painting the faces purple I continue on with Space Wolf Grey as the spot highlight.

Step 7: Leviathan Purple Wash

The whole face (other than the bone/teeth)  is then washed with Leviathan Purple to pull it together. It cools down the red face and smooths the simple layering of the tongue.

Step 1: Orkhide Shade

Orkhide Shade is a great base coat for any green. It is dark and covers easily.

Step 2: Goblin Green

Goblin Green is then painted on as the first highlight. The Orkshade Green is left in the deep recesses and near the handle of the blade.

Step 3: Scorpion Green

This is where the “power lines” start to show. Scorpion green is used to highlight the edges, tip, and contours of the blade. It is then brought down the blade’s length in a jagged pattern, with more focus near the tip.

Step 4: Scorpion Green and Skull White

Skull White is added to the Scorpion Green to add even more brightness to the blade. This is primarily near the tip and highest edges of the details.  The lines of power are highlighted at this stage.

Step 5: Skull White

Skull White is then used to do spot highlighting near the tip and certain parts of the power fields to give them more accent.

Step 6: Thraka Green Wash

Finally I wash all the whole sword with Thraka Green Wash. This tones down the white areas and pulls all the colors together. The effect is subtle, but helpful since I don’t do a lot of blending.

Step 1: Khemri Brown

I start with a base coat of Khemri Brown for all the bone areas. This is a great Foundation Paint that covers all the darker areas well and provides a nice brown to start to bone from. I do avoid deep cracks or the eye sockets which should still be black from the primer.

Step 2:Khemri Brown and Bleached Bone

Bleached Bone is then added to the Khemri Brown in incremental amounts. I start with a 1:1 mixture of KB and BB since the foundation paints contain so much pigment. I work this up to about 1:3 KB to BB.

For the horns I do less and less highlighting near the base to create a darker look. Near the tip I completely cover the ridges and grooves until the final highlighting to create a bright area.

The skulls are often a mixture of highlighting the ridges of the face and creating false ridges on the top and side of the skull to create additional depth to the otherwise flat plane.

Step 3: Bleached Bone

Pure Bleached Bone is then used to continue the highlighting.

Step 4: Bleached Bone and Skull White

Skull White is then added to the Bleached Bone to create highlights near the tip of the horns and edge of the ridges on the skull.

Step 5: Skull White

Pure Skull White is then used to do spot highlighting.

Step 6: Gryphonne Sepia Wash

Finally I wash all the bone areas with Gryphonne Sepia Wash. This helps re-establish the ridges in the horns and creates a more aged look. The wash is focused on the base of the horns and cracks in the skull. Extra wash is pulled off the tips of the horn and flat areas of the skull where I want to keep some of the brightness.

Step 1: Vermin Brown

All the areas that will be leather are painted with Vermin Brown. It is a nice dark red/brown that covers the metallic paint well.

Step 2: Snakebite Leather

Snakebite Leather is then used to high light the leather areas. This is a heavy highlight, meaning that only the deepest recesses are left Vermin Brown.

Step 3: Snakebite Leather and Bleached Bone

I then start to mix Bleached Bone into the Snakebite Leather for the highlights. This is a progressive stage where I start 2:1 SL to BB, then 1:1 and finally 1:2 SL to BB.

Step 4: Bleached Bone

I then spot highlight with pure Bleached Bone. This is focused on the top most areas and adds a bit of shine to the leather.

Step 5: Ogryn Flesh Wash

Finally I use Ogryn Flesh to tie the highlights together and tone back the pure Bleached Bone. Devlan Mud could work for this wash as well but I wanted a slightly redder looking leather.

Step 1: Primer

I always prime my Iron Warriors black. If any one has tried to paint metallic over a white base coat, you know why.

Step 2:Silver

This is by far the messiest stage. Depending on how fast I’m trying to paint the model I some times water down Mithril Silver and coat the whole model silver in one go. For most of the models though I try and only paint the areas I know will be silver as extra paint can quickly cover up details.

I paint this layer smooth using Mithril Silver. I use Mithril Silver since I later lather two washes onto the model and I don’t want it to look too dull.

Step 3: Gold

For my gold areas I use a mix of Shining Gold and Iyanden Darksun. I add the Iyanden because I do get a bit lazy, pure Shining Gold doesn’t cover well, especially when I get spots of silver on areas that should be gold. To do it right I should go back and repaint the gold areas black but I found adding a bit of the foundation paint doesn’t change the color much but great improves the gold’s ability to cover.

It doesn’t come through much on the picture but at this point the model looks like a 5th grader painted it: nice and shinny with no depth.

Step 4: Black Wash

This is where the magic starts. Ever since the wash sets came out I’ve bought more washes than paints because I use so much of them. This is why in part I stopped buying Badaab Black wash and made my own using Chaos Black, lots of water, and a drop of dish soap.

I take the big wash brush and liberally apply the black wash all over the model. I really slosh it on there at first so that it gets into the deeper crevices. Once the model is dripping black I clean off the brush and begin to “pull” the extra wash off the flat areas of the model.

Step 5: Mud Wash

Once the black wash fully dries (2+ hours) I’ll then apply a second wash using Devlan Mud. This wash is used more for it’s coloring than adding depth. It gives a more tarnished look to the metals that is perfect for warriors fighting for centuries in the Warp.  When I apply this wash I don’t put on as much as the black, but spread the color around the model to get good coverage. Large flat areas I purposely streak the wash along the lines of the model, such as the arm guard on this model would be streaked down its length.

Step 6: Dry Brush

Once the mud wash is completely dried (another 2+ hours) I then Mithril Silver and very lightly dry brush the full model. This helps bring back some of the shine to the hard edges and tarnishes the gold a bit more. I often skip this step for my core marines but for the “eye catching” units I spend the little bit of extra time to do this step.